How To Remove A Push Down Tub Drain
How To Remove A Bathtub Drain Stopper
Easy, step-by-step instructions for removing different kinds of tub stoppers
Your tub stopper is such a pocket-size role of your bathroom overall, yet tin cause big headaches when it isn't functioning properly. If you demand assistance figuring out how to remove or supercede your tub drain stopper, yous've come to the right identify. Your friends at PlumbingSupply.com® are happy to provide you lot with this easy tutorial that will walk you through identifying the type of stopper you currently accept and how to remove it, likewise as offering tips and tricks to assist ensure the process is every bit simple as possible.
There are six mutual types of bathtub drain stoppers:
Already know what kind of stopper you have? Click whatever image above to jump directly to instructions for that type of stopper.
How to identify which stopper yous take: If your tub does not take a trip lever, it is either a Toe Bear on, Button Pull, Flip-It®, PresFlo®, or a Lift-and-Turn way stopper. These stoppers operate without a trip lever machinery and are generally the easiest kind to remove or replace since they do non require the removal of the trip lever. Read the descriptions below to help you further determine which style of stopper y'all accept.
- Toe Touch: The stopper opens and closes with the push of your toe.
- Push-Pull: The stopper has a knob in the center and y'all must push button it down to close and pull it upward to open up.
- Elevator and Turn: This looks very similar to the Push-Pull style, but you volition need to lift and plough the stopper (in contrary directions) to open and close.
- Flip-Information technology® : This stopper uses a toggle that when flipped from side to side, will open or close.
- PresFlo® : This stopper uses an o-ring to create the seal and spins inside the drain opening to either an open up or airtight position with but slight pressure on one side.
- Pop-Up: This style can have a trip lever or turn style mechanism on the overflow that moves an internal button rod against a rocker arm attached to the stopper to heighten or lower the stopper. Pop-ups have a visible stopper in the tub drain, and cannot exist covered by a strainer.
- Plunger Style: This style likewise uses either a trip lever or plough manner mechanism to operate. An internal plunger is used to finish h2o menses. When the overflow plate is activated by tripping a lever or turning the plate it causes the plunger to raise or lower. Trip Lever and Plough Style assemblies normally practice not have a visible stopper in the tub drain. The drains but take a strainer of some sort covering the drain.
Instructions for Removing Bathtub Drain Stoppers
How to Remove a Toe Affect Tub Stopper
Tools needed: Flathead screwdriver
Step 1
With the stopper in the "open" position (like you lot are elimination your tub), hold the shaft cylinder of the stopper and turn the top counter-clockwise. If this action causes the shaft cylinder to also want to plow, then release your hold on the shaft cylinder and continue to unscrew the stopper. The shaft cylinder is threaded into the cross bar in the strainer and in one case it is unthreaded, lift and remove the consummate stopper.
Stride 2
However, for some Toe Touch on stoppers, property the shaft cylinder and turning the top cap will permit you to just unscrew the peak finished cap portion of the stopper. If this is the case, then unscrew the top cap all the way off.
Step 3
Once the summit cap has been unscrewed and lifted off, unscrew the shaft cylinder counter-clockwise to remove the threaded post screwed into the cantankerous bar in the strainer. Some shaft cylinders may have a screwdriver slot to allow yous to unscrew the shaft/mail with the use of a screwdriver.
Purchase our most popular toe impact replacement stopper right here! 
Need a different foot actuated stopper than this 1? We've got more!
How to Remove a Push-Pull Tub Stopper
Tools needed: Flathead screwdriver , make clean rag , pliers
Step one
The stopper tin be in the "open up" or "closed" position.
Step 2
Remove the knob on the height of the stopper. Hold the body of the stopper in place with one hand and with the other hand unscrew the knob past turning information technology counter-clockwise. If the knob will not unscrew, and then wrap the rag around the knob and use the pliers to help remove the knob.
Step three
Utilise a flathead screwdriver to unscrew the brass insert (post) in the centre of the stopper past turning the postal service counter-clockwise. The mail service is threaded into the crossbar of the strainer.
Step 4
Lift the stopper off the strainer.
Buy our near popular push-pull replacement stopper right here!
Need a different push-pull stopper than this one? We've got more than!
How to Remove a Elevator & Turn Tub Stopper
Tools needed: Flathead screwdriver , set of Allen wrenches
Footstep 1
With the stopper in the "open" position (like you are elimination your tub), hold the body of the stopper and slowly turn the stopper knob and await for a visible gear up screw on the knob. If your stopper does not have a visible set up spiral on the knob then plough the stopper counter-clockwise until the stopper unthreads from the strainer and move on to Step 6.
Step 2 If you practice not see a set screw then you lot may have a blazon of stopper that has a channel built-in around the stopper. In that location is a pin on the strainer that the channel rotates around to achieve the lift and turn action. Lift the stopper and begin rotating the stopper slowly counter-clockwise until the slot at the bottom of the channel aligns with the pin on the strainer releasing the stopper to pull up.
If your stopper does not have a visible set screw on the stopper knob and does not unscrew then you may accept one of ii unlike styles of elevator and turn stoppers. One will have a set up screw beneath the stopper on the post shaft. With the stopper still in the "open" position, lift the stopper upwards. Turn information technology until y'all come across a small screw. This volition be the "set up" spiral and you lot can now proceed to Step iii.
Step 3
Either a screwdriver or allen wrench is needed to loosen the set screw. Typically, y'all do not need to remove the screw entirely, simply loosen it enough to remove the stopper.
Step iv
Lift the stopper off the postal service. If your stopper has a prepare screw and will not pull off the post then try loosening the prepare spiral a little more. If the fix screw is removed and it volition still not slide off the post, then there may be a calcium water build-upwardly between the stopper and the post. Y'all may wish to use a liquid wrench type solvent or exert more than pressure since the stopper should lift off the postal service.
Footstep 5
One time the stopper is lifted off of the mail service and so unscrew the post from the strainer.
Step 6
Lift off the stopper. If your stopper does not accept a set screw and it does not lift off, but continues "spinning" without unscrewing, then the post threads could be stripped and you would need to exert upwardly pressure level while unscrewing the stopper in hopes of unthreading it from the strainer. If this maneuver does not work and so y'all will need to unscrew the bathroom waste matter flange from the bleed piping.
Pro Tip: We recommend replacing lift and turn stoppers with button-pull stoppers as they are much easier to operate. All you have to do is pull up on the stopper to open it, but with lift and plow stoppers it can often be a hassle to notice the correct spot where the stopper will stay up or go dorsum downwardly.
Purchase our most popular push-pull replacement stopper correct here!
How to Remove a Flip-It® Stopper
Tools needed: None!
This is probably the easiest stopper to remove as all you'll need to practise is pull it gratuitous from your drain!
Step 1
O-rings keep this Flip-Information technology® tub bleed stopper in place. Gently grasp the outer chrome round body (not the toggle) and begin to rotate the stopper pulling upwards at the same fourth dimension. It does not affair in which direction you rotate the stopper. Sometimes wiggling back and forth while pulling up may work also.
Purchase the Flip-It® "universal" tub stopper right here!
Vivid Thought! Want to convert your existing tub drain to employ a Flip-It® stopper - nosotros offer complete conversion kits hither!
How to Remove a PresFlo® Stopper
Tools needed: Pocket-size suction loving cup
PresFlo® drains seal using an o-band that holds the cover in place and so information technology tin be easily rotated to shut the bleed - making information technology fantabulous for persons with disabilities or who might take difficulty bending downward to utilise other types of drains. Nevertheless, this unique system can be kind of catchy to effigy out how to remove. We hope you lot didn't throw away that little suction cup your drain came with! (Simply if you did, don't worry, we've got you covered.)
Step ane
Ensure the stopper is flat/level in the bleed.
Stride ii
Press the suction cup downwards onto the stopper until a good seal is formed. This might take you a couple of tries since the stopper will want to rotate with the pressure.
Footstep three
Firmly grasping the suction loving cup, pull the stopper direct upwardly and out of the drain trunk. Again, since this stopper likes to rotate, you lot might demand a couple of tries to get information technology level plenty to come out.
Purchase a PresFlo® tub stopper, o-band and/or suction cup right here!
Add a suction cup to remove your onetime PresFlo® stopper - $ii.25
Purchase our nigh pop Nu-Fit® conversion kit right here!
How to Remove a Trip Lever or Plunger Style Stopper
Tools needed: Screwdriver
Plunger tub drains have a stopper located within the waste matter and overflow pipe, and are activated using a Trip Lever or Plough Fashion overflow plate. Virtually will have a strainer plate covering the drain. The cover plate simply screws into the body of the bleed, every bit shown in this example, and can exist removed or inverse by just unscrewing it.
Step 1
Locate the screws on the trip lever.
Stride 2
You will need to remove the screws from the encompass plate of the trip lever, all the same, remove but ane screw from the faceplate at first. With a screwdriver begin to slowly loosen and remove ane of the screws, either one, your choice.
Step 3
Once one of the screws is removed then hold the faceplate securely and begin to slowly remove the other spiral. Every bit the faceplate is loosened information technology will brainstorm to hinge. As soon as the faceplate is loose enough to swing down and abroad (be careful not to scratch your tub) to reveal the reverse side screw hole, reinstall the get-go screw back into the at present exposed overflow elbow just a few turns. This maneuver can help you in two ways. If your overflow elbow is loose it can keep the loose elbow and pipe from disappearing behind the tub. It can besides keep you lot from loosing the overflow washer that could autumn downward behind the tub. The overflow washer is normally installed directly backside the tub located between the overflow elbow and the tub.
Step 4
Now remove the 2nd screw completely while holding onto the faceplate.
Step v
Pull the trip lever out and away from the tub wall, y'all may need to wiggle information technology a scrap for it to come loose. With this blazon of tub drain, the stopper is really inside the pipe, non at the drain opening.
Footstep 6
If needed, the stopper tin be adapted by either tightening or loosening the adjustable linkage that connects the trip lever to the stopper. The stopper must exist adjusted to the correct pinnacle in order for the bathtub to drain correctly.
Troubleshooting Tips:
- If the stopper is too loftier, and so the bathtub volition not plug upwardly completely and will allow h2o to slowly drain while the tub is plugged.
- If the stopper is adjusted too low, when in the open position, the bathtub will drain very slowly every bit the stopper is partially blocking the drain opening. This may make information technology seem like there is a clog in the drain, since the tub is non draining well.
Purchase our near popular trip lever replacement associates right here!
Please notation: The trip lever assemblies higher up volition fit well-nigh tub drains up to 16" high. If you have a different size or need specific parts, nosotros offer more trip lever or plunger fashion options!
Delight note the information provided is intended to provide a basic cognition of plumbing related repairs. This data is general and may non suit all applications. If y'all are at all unsure of your abilities to complete one of these projects, please consult a professional. Always remember to cheque with local code government before commencement whatever project.
Related Items & Articles
render to tiptop ↑
Source: https://www.plumbingsupply.com/how-to-remove-a-tub-drain-stopper.html
Posted by: costasomper.blogspot.com
0 Response to "How To Remove A Push Down Tub Drain"
Post a Comment